Detailed Product Description

Name:
 High speed tube filling and sealing machine, tube filler and sealer

Main Parameters:
Tube diameter:
Metal tube: 10-35mm Plastic and combined tube: 10-60mm
Filling volume:
Metal tube: 1-150ml Plastic and combined tube: 1-250ml
Capacity: 60-100 tubes/min Filling accuracy: ≤+/-1%
Motor Power: 2.2kw Air pressure: 0.4-0.6mpa
Siemens PLC System, motor and electrical components.
The Taiwan AIRTAC pneumatic components.

Features:
1. The tube is automatically presses into the tube mold.
2. The elastic tension type cup is adopted to guarantee the consistent sealing height.
3.the automatic color code aligning system rotated by stepping drivingtube cup is adopted to carry out automatic color code aligning for ovaltubes, profile tubes ect.
4. The material feeding system of mechanical transmission is adopted to guarantee the stability of loading capacity.
5. Original Swiss LEISTER heater is adopted.
6.The internal wall of tube adopts hot air sealing and the external wallof tube adopts cooling water circulative colling, which can beautifulsealing effect.
7. The fan (made in Taiwan) is adopted to discharge the poisonous gas produced during the heating outside the room.
8. After the sealing, the wind cooling system is adopted to prevent the heat from being conducted to the ointment.
9. PLC automatic control
10.Clear and visible stainless steel frame.
11.Easy to realize the connection of emulsifier and filling machine.
12.Simple and clear replacement operation of large and small tube diameters.
13.Automatic completion of filling, sealing and batch NO. Printing in one machine.
14.Provide with such functions as automatic tube feeding, automatic code searching and automatic sealing and filling.
15.Stepless frequency conversion speed control is available.
16.Automatic quantitative control of production capacity can be realized.
17.Automatic batch NO. Printing.
18.Human-machine interface with direct display and control.
19.Provided with malfunction alarm, door opening device and automatic stopping device of mechanical overload.
20.The combined material feeding forms of blow cutting and cutting can guarantee the filling of high viscosity material.
21.Provided with the accurate control function of no filling if there is no tube.

The Followings are optional:
1. Automatic detection of tube direction inversion.
2. Automatic cleaning and dust collecting device for the inside of tube.
3. Tube bottom material feeding form.
4. Equipped with automatic material temperature control blending system.
5. Ultrasonic hopper level automatic detection system.